Type A \ Type B Installation of Outdoor Bamboo Wall Cladding:
1. Fix the keel on the wall first, the keel must be firm and parallel to the wall surface, and the keel spacing is 550mm
2. Install the wall panel from the top and bottom, place the wall panel horizontally, and the horizontal end node is located at the center of the vertical keel. Then fasten the side edge of the top wall panel with the screw to the wall keel. Then use a special fastener to align the slot on the underside of the wall plate and slide it upward until the fastener is fully buckled into the side slot of the wall plate and then fasten the fastener to the keel with screws.
3. From the top down to the second wallboard, as long as the wallboard side to be installed is aligned with a wallboard groove, adjust the tightness and fasten it on the lower side with fasteners;
4. When installing the lowermost wall panel, screw the lower side directly to the keel.
Type A
Type B
Type C Installation of Outdoor Bamboo Wall Cladding:
1. Fix the keel on the wall first, the keel must be firm and parallel to the wall surface, the keel spacing is 550mm
2. Install the wall panel from the top to bottom, place the wall panel horizontally , and the horizontal end node is located at the center of the vertical keel. Fix the wall panel directly on the keel with screws and nails.
